面粉石磨機的應用可以說效果不錯，針對小麥等材料進行加工，當然加工過程中因?yàn)椴牧系谋旧淼奶匦裕瑫?huì)造成周圍很亂很臟的情形，所以需要進行清理，那么在這里講兩種清理方式。

　　The application of flour stone mill can be said to have good effect. For the processing of wheat and other materials, of course, because of the characteristics of the material itself in the processing process, it will cause a very messy and dirty situation around, so it needs to be cleaned up. So here are two cleaning methods.

　　干洗清理工藝。面粉石磨機的干洗工藝主要包括篩分、去石、篩選、脫粒、風選和磁選。小麥表面的清理主要由脫粒設備完成，在此過程中設置了特殊的水分調節過程，這是目前比較常用的一種清理方法。

　　Dry cleaning process. Dry cleaning process of flour stone mill mainly includes screening, stone removal, screening, threshing, air separation and magnetic separation. Wheat surface cleaning is mainly done by threshing equipment, in which a special water regulation process is set up, which is a commonly used cleaning method at present.

　　濕法清洗工藝。面粉石磨機的濕消化過程包括篩選、篩選、磁選、洗麥等過程，使用面粉石磨機處理小麥的過程稱為濕洗過程。面粉石磨機具有表面清理、去石、裝水等功能，可簡化流程，減少投資。但由于濕法清洗用水量大、污染環境、落水精度難以控制，目前很少使用。

　　Wet cleaning process. The wet digestion process of flour and stone mill includes screening, screening, magnetic separation, wheat washing and other processes. The process of wheat processing with flour and stone mill is called wet washing process. Flour stone mill has surface cleaning, stone removal, water filling and other functions, which can simplify the process and reduce investment. However, due to the high water consumption, environmental pollution and difficult control of falling precision, wet cleaning is seldom used.

　　另外在清理的過程中，利用面粉石磨機對小麥表面進行處理的過程稱為去皮清理過程。面粉石磨機對小麥表面進行清洗，粉碎各種強度低于小麥的雜質，有利于調水。但由于小麥磨后皮層比較破碎，磨時脫皮易碎，影響好面粉的出品率，所以目前很少使用。

　　In addition, in the process of cleaning, the use of flour stone mill to treat the wheat surface is called the peeling cleaning process. The flour stone mill cleans the surface of wheat and crushes all kinds of impurities with lower strength than wheat, which is beneficial to water diversion. But because the cortex of wheat is more broken after grinding, peeling is fragile when grinding, which affects the yield of good flour, so it is seldom used at present.

　　在面粉石磨機的清洗過程中，要保證過程的連續性，并根據工藝設計要求，選擇產量相匹配、技術參數合理的設備。降低消耗，節省投資，結合廠房建設，實現合理布局，盡量減少物料運輸環節。保護環境，確保生產，確保勞動衛生。

　　In the cleaning process of flour and stone mill, the continuity of the process should be guaranteed, and the equipment with matching output and reasonable technical parameters should be selected according to the requirements of technological design. Reduce consumption, save investment, combined with plant construction, to achieve a reasonable layout, as far as possible to reduce material transport links. Protect the environment, ensure production safety, ensure labor health.

　　面粉石磨機的干濕清理方式如何？以上便是問題的相關解答了，當然還是要根據您的實際需求來選擇相應的合適的清理方法才行，更多內容的咨詢您可以來網站www.kongtiaochuzu.com看看！

　　How about dry and wet cleaning of flour stone mill? The above is the relevant answer to the problem, of course, or according to your actual needs to choose the corresponding appropriate cleaning method, more information you can come to the website www.kongtiaochuzu.com to see!